豐興高壓截止閥材質,TOYOOKI高壓截止閥結構圖
它的結構 長度大于閘閥，同時流體阻力大，長期運行時，密封可靠性 不強。
手輪、手柄操作的截止閥可安裝在管道的任何位置上。
Cut-off valve, also known as cut-off, is the most widely used a valve, it is popular,
Is due to open and close the sealing process between the sealing surface is small, more durable,
Open height is not large, easy to manufacture, easy maintenance, not only for low pressure,
手輪、手柄及偉動機構，不允許作起吊用。
When the high-pressure shut-off valve is opened,
the opening height of the valve flap is 25% to 30% of the nominal diameter,
The flow has reached the maximum, indicating that
the valve has reached full position.
介質的流向應與閥體所示箭頭方向一致。
力與由介質的壓力所產生的推力，關閥門的力比開閥門的力大，
所以閥桿的直徑要大，否則會發生閥桿頂彎的故障。
So the fully closed position of the cut-off valve should be determined by the stroke of the valve.
High-pressure cut-off valve is mandatory sealing valve, so when the valve is closed,
Pressure must be applied to the flap to force the sealing surface from leakage.
近年來，從自密封的閥門出現后，截止閥的介質流向就改由閥瓣上方進入閥腔，
這時在介質壓力作用下，關閥門的力小，而開閥門的力大，
But also for high pressure. Its closed principle is to rely on the pressure of the valve,
So that the valve sealing surface and the valve seat sealing surface close to prevent the media circulation.
Only one-way flow of the valve, the installation of directional.
閥桿的直徑可以相應地減少。同時，在介質作用下，這種形式的閥門也較嚴密。

豐興高壓截止閥材質,TOYOOKI高壓截止閥結構圖

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!