德國HAWE徑向柱塞泵

Parameter Coding min max Default Standardization
P0 Min. current Imin 0 99 0 20 mA / Incremental
P1 Max. current Imax 0 99 50 20 mA / Incremental
P2 Ramp time up Tauf 1 99 10 100 ms / Incremental
P3 Ramp time down Tab 1 99 10 100 ms / Incremental
Excessive current, coil current too high Check wiring of connected coil
o The voltage of the power supply is too low
o The resistance of the connected coil is too high
(for the available voltage of the power supply)
o Broken wire to the coil
o Coil defective
0.062 0.09 0.18 700 1.26
0.096 0.14 0.27 700 1.96
0.14 0.2 0.4 700 2.83
0.19 0.28 0.54 700 3.85
0.25 0.36 0.71 700 5.03
0.31 0.45 0.89 550 6.36
0.21 0.3 0.6 700 2.83
0.29 0.4 0.8 700 3.90
0.38 0.5 1.0 700 5.03
0.59 0.8 1.6 560 7.85
0.84 1.2 2.4 390 11.3
1.0 1.45 2.8 330 13.3
o Final stage of the amplifier card is defective
Replace amplifier card
EEPROM error Replace amplifier card
X1-4 10 - 48 V supply voltage
X2-1 enable/disable input
X2-2 Output 5 V
P4 Dither amplitude Ad 1 99 0 %
P5 Dither frequency fd 20 100 50 Hz
(Dither period) (Td) (50) (10) (20) (ms)
The 2-digit display is the user interface. It shows:
o Current state in %
o Parameter valuesre
External deactivation Release deactivation input
 

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!